Extreme Duty sway bar links - 8.0" Center to Center

Suspension Maxx is proud to introduce our Extrem Duty Sway bar links. Designed for lifted Dodge Ram trucks that do not use a sway bar relocation brackets. The Extreme Duty sway bar links are based off our original maxx link patented design but utilize a 33% larger and 50% stronger configuration for Lifted applications.  

The higher roll center of Lifted 2500 & 3500 trucks puts higher dynamic loads on the stabilizer links. Having a strong sway bar link that can handle these extreme loads without breaking is critical.  The Extreme  Duty sway bar links are built for these conditions.

SMX-122580EX

Extreme Duty Sway bar links for2000-2001 RAM 4x4 1500 and 2000-2002  RAM  4x4 2500/3500 With Approximate 4" of Lift. Center to center measurement of 8.0"
Sold in Pairs

• Wear prone stock ball socket is replaced with a long-lasting, simple and robust design

• Thermoplastic/urethane bushings perform better and last longer than original equipment rubber design

• Features include 4140 alloy steel eyelets, drawn over mandrel steel tubing and grade 8 bolts

• Direct replacement for OE sway bar end links – measures 8.0” center to center

• Maintenance-free, corrosion resistant, and won’t squeak or rattle

• Excellent SuspensionMAXX customer service and technical support

• 100% American Made and covered by the MAXXLinks Limited Warranty

Applications

• 2000-2002 Ram 4x4 2500/3500

• 2000-2001 Ram 4x4 1500

MAXXLinks SMX-1225 are engineered to directly replace the stock sway bar links on 2000-2001 Ram 1500 4x4, and 2000-2002 Ram 4x4 2500/3500. MAXXLinks Heavy Duty Sway Bar End Links are your solution to weak original equipment sway bar links. Instead of using a ball and socket design that is prone to rust and deterioration, we implement a rubber bushing that provides needed articulation without corrosion and premature wear. MAXXLinks remain tight and free of play much longer than the stock links, and they won’t rattle over bumps. Rather than frequently replacing your OE links, enjoy the cost efficiency of long lasting MAXXLinks.

MAXXLinks Heavy Duty Sway Bar End Links use thermoplastic/urethane bushings to perform better and last longer than the original equipment ball-in-socket design. Eyelet links are manufactured with ultra-high strength 4140 treated alloy steel and electroplated with yellow zinc dichromate for corrosion resistance. Shaft sections are made from drawn over mandrel steel tubing and grade 8 bolts for durability. SMX-1225 also features an extra heavy duty mounting links which are required for this application. Maintenance free MAXXLinks come complete with stainless steel washers and locking fasteners. MAXXLinks can be used as high-quality replacement parts or as a preventative maintenance measure.

MAXXLinks Heavy Duty Sway Bar End Links simply replace original equipment sway bar end links. No drilling is required. Installation takes just forty five minutes to an hour and is supported by the SuspensionMAXX Technical Support Program. SMX-1225 directly replaces Dodge part number 68001734AB. 100% manufactured in the US and covered under the MAXXLinks Limited Warranty.